This mid-terraced, steel portal framed workshop/warehouse provides some 1,500 sq.ft. of accommodation on the ground floor and has a substantial mezzanine of a little under 900 sq.ft above which has been extended to incorporate a small kitchen and office facility but is primarily used as further workshop space in the unit's current configuration.
The unit benefits from an eaves height of 19ft rising to an apex of 24ft 2in, with a minimum clear height under the mezzanine of some 8ft 9in.
The unit is accessed via an up-and-over folding door which is 9ft 9in wide by 13ft high. Additionally there is a separate personnel door and a further fire escape to the rear of the premises.
Our client, the current occupier, is looking to retire and is currently trading as a carpenter/joiner and the unit is fully fitted out with a variety of woodworking machinery. A full inventory is available on request as these are available if required. Given our client's use the premises are currently heated by way of a waste-wood burning boiler which heats the central heating system additionally. There is a good level of natural daylight admitted to the premises via skylights to the roof and glazing and both front and rear elevations.
On the first floor a small office of approximately 90 sq.ft. has been constructed overlooking the front forecourt, with a small kitchen area of 40 sq.ft behind it.
Externally there are three car parking spaces to the front of the unit