Mill Hill Street, Bolton, BL2

An extensive site incorporating 3 industrial buildings, one which has been converted fully to offices and one with extensive craneage. The site is sloping and has an automated sliding access gate fronting Kestor Street.

Office building A converted industrial unit constructed of a steel portal frame, clad and incorporating a mix of open plan and cellular accommodation. An internal layout can be provided upon request. The unit could be re-utilised as a warehouse unit by stripping out the offices if required.

Middle unit A detached unit split internally into three sections with WC's and a kitchen facility. The unit is constructed of a steel portal frame with clad elevations. There are 3 roller shutters in order to access and 2 x 1 ton cranes within.

Main part high bay unit The main unit has a partial high bay section to one side. There are numerous roller shutters in access and yardage for deliveries.

The unit also has the following craneage: 4 x 5 tonne 3 x 10 tonne 1 x 20 tonne 1 x 30 tonne

Internally the unit has a clear section and a smaller loading bay attached. There are some small offices, WC's and gas radiant heaters. Height to eaves varies from 12m to 25m.

Externally the estate service access roads are tarmac as are the parking areas. There are extensive landscapes and wooded areas on the site plus the River Coal runs around one boundary. There is a pedestrian access over a bridge to the back of the site to Tonge Moor Road. The site falls under Policy RA1 & P1 of Bolton's adopted local plan.

ARRANGE